How Long Can Sperm Live With Watery Cm

[REVIEW] 360LIZARD and Walkthrough of use. 2011 Releases

Good review we are pleased to present an exclusive and world premiere. Thanks to
spainsellers 360Lizard for unity and for its new hard that we will make life easier all






The tutorial I'll do it on an Xbox 360 and the FAT LiteOn reader 74850C.

But we have the SCORPION 2 so we could Flashing readers SLIM (Video explaining the end).

to start:
will need to open the console and make the reader I leave you a tutorial to open the XBOX 360 console HERE.
After being a LiteOn we open the reader with 4 screws star you have and remove the bottom cover.

Once the reader in your hands we get off the Lizard Toolbox:
http://www.360lizard.com/website/downloads.php
Once downloaded on the first run will tell you that you have to download the. SET Site:
http://cfwfileset.blogspot.com/
I descargais the " LTPlus " and "Original " and the meteis. set in the folder CFW_Templates the Toolbox. Being
something like this:


Then connect the cables:
First the SATA drive and SATA port 360Lizard:


After light cable that comes with the reader's Lizard (in this case) the Xbox 360:

In this case as we will flash a liteon need to connect the SPEAR:


light the Xbox 360, ran the ToolBox on the PC, put in "ON" the lizard Light cable and connect via USB to the PC 360Lizard.


ToolBox execute, let's lower left and select RE-SCAN. Then select the COM
has given us. (In this case COM7)


We select and check it out at the top right select "Get Device Details ".


USING 360LIZARD :
The menu is very intiutivo 360Lizard and may be placed entirely in Castilian.
use buttons are
The red button is to accept the the right the top is dropping the right menu and pulling down the left.
also to cancel and return to the previous menu is keeping up until a "*" Up to right.

Steps to a LiteOn:
1 º) First enter the menu Liteon:


2 º) and there choose "Read keys using SPEAR" tight accept.


3 º) We will leave this message:


4 °) We have to put the reader in "B" so there you have to go to cable light 360Lizard and hold the button "EJECT" to release the tray. Once taken drop
EJECT and power cycle the OFF switch you have.
Move the tray until it runs down the middle more or less.

5 º) After this we have to put the spear in the hole R707 which is this:


6 º) Once you are gone we press OK in the 360Lizard and wait till this:


7 º) Press OK and we will leave it (You see that 360Lizard leads only):


8 º) Now go into action ToolBox. Let ToolBox it and click on "Lizard SNAPSHOPT GET"
And keep our FIRMWARE:)


9 º) We keep it wherever you want (pretty sure) and the ToolBox we have generated these files:


10 º ) Once we have them and must return to 360Lizard Remove the reader's information. To do this go to the menu of LiteOn and select "Erase Drive Firmware"


11 th) We asked several times if we are sure (give OK all the time):


12 º) When finished it will tell us off and on again the reader. To do this go to cable 360Lizard light and give the new switch assembly OFF / ON.


13 degrees) off and on Once we give OK and get this:


14 º) As you see tells you that say you run the "MTK", then let it. We return to the menu
LiteOn and select "Log Mode MTK"


15 º) We will leave this:


16 º) We give OK. And back Toolbox now. We will prepare our Fimrware flashed, is almost ! .

17 º) This picture explains well the steps:

1. We give "CFW Generator
2. look we're in" Easy View "
3. tightened to" Load FW "and select our firmwareOriginal in this case I have called "LiteonMio.bin"
4. Template fileset In CFW open the dropdown and select LTPLUS 1.1
5. tightened "CFW Save as ..."

18 º) Save the firmware "flash" where we want.
I call "NOSEQUE_CFW.bin"


19 th) We return our beloved 360Lizard and go to menu "Write Firmware to Drive" in the menu Liteon:


20 º) We will START FILESERVER ON PC "


21 º) Go back to Toolbox and pressed to" Lizard File Serve "


22 º) We select our" NOSEQUE_CFW.bin "


23 º) FINALLY our 360Lizard begin to" work ":


24 º) When you leave the last image you have your flash player! Monta
all over again and enjoy your reader with the latest firmware version:)

As you can have checked the new 360Lizard explains everything very well step by step and you almost holding hands to do so.
This version is still not autonomous so you need a PC to hand, but you can do it all next updates without a PC, only with the 360Lizard, a battery and a MicroSD!.

Thanks again for letting us spainseller.com have exclusive news and 360Lizard for their good work in this small but powerful device.

any doubt, you can post it here:)

videos as I leave it for other readers:
(English)
LiteOn NO-CUTS:
http://www.youtube.com/watch?v=uVkQi4-Vl3M
http://www.youtube.com/watch?v=yZMttPf1sms
(In English) Liteon
93450c: http://www.youtube.com/watch?v=tmed4Ueq4tY
Benq: http://www.youtube.com/watch ? v = Pz4QMZveqJk